Warr Dogz bad ass complete 12.7x42/.50 Wolf Upper, "The Big Bad Wolf!" Is 100% ready to fire.
We put a lot of time and effort into listening to everyone's issues
with other. 50s on the market to make sure those problems are corrected
on our 12.7x42(.50 Cal)Wolf! Our upper will mount to any AR-15 platform lower. Giving you the .50 caliber fire power to take down anything in your sights.
Our barrels are fit to each upper, we don't sell
assembly line uppers. Each and everyone of our uppers are hand sanded
and fit to the barrels. Providing smooth feed and ejection. Within
enlarged ejection port opening to eject that .50 cal casing. Our hand milled and finished Cerro Forge uppers, we took ours a few steps further then most and opened our ejection port opening to 0.65in instead of the standard
0.62in and we also opened the upper right side for no cycling issues
spitting out the big bore brass.
For the finishing touches to make this a true big bore upper we blend
the feed ramp to aid in the center feed design unlike most that still
have the M4 .223/5.56 feed ramps, which is not needed in the .50 design.
We then sand all openings and edges to remove any burrs to aid in the
ejection of the brass. Finishing with a high shine polish to the feed
ramp!
We don't charge to blend the center feed ramp to your
barrel and debur all sharp edges that cause damage to your brass and
feeding issues. Most other companies don't address this issue or they
charge you to address this before or after you receive your upper.
Our 12.7x42mm(.50 Cal) "The Big Bad Wolf" includes:
• Satern 12.7x42(.50 cal) Barrel options: 16" or 18", Medium contour, Mid length gas, 875 gas block diameter, 1-20 twist, 3/4x24 threaded muzzle, Stainless steel
• Muzzle Device options: Gen5 TriDelta, Heartbreaker, Heliprt, Warr Dogz exclusive Venom Defense Tank
• Gas Block
• Gas Tube
• Handguard options: 12" MLok, 12" Ultra Lightweight MLok, 15" Honeycomb Keymod, 15" Honeycomb MLok, 13.5" Diamondhead Keymod
• BCG options: Black Nitrade
or Nickle Boron Carrier with properly head-spaced Black Nitrade Bolt
• Standard Big Bore Forged Upper
• Strike Industries Ejection Port Door
• Strike Industries Forward Assist
• Charging Handle options: Milspec, Fortis, Archangel Rattler, Tomahawk, Radian Raptor
• Includes 1 Color of Cerakote, optiona Cerakote upgrades available
• Optional Caliber on Upper Engraving
• Optional Barrel and Muzzle Device Cerakote
• Optional Caliber on Barrel Cerakote
• Blending and polishing of feed ramps, blending barrel to upper, precisely align has block to barrel to keep from short stroking, tighten fitment between gas block and gas tube so there is no need to wait for carbon build to seal any gas leaks
Upper shown with Heartbreaker Tank Brake, 15" Cutaway Mlok, 16" Barrel, and Tomahawk Charging Handle.
All Complete Uppers come with one Cerakote color, be sure to select your color.
Updated 4/30/20
***Due to the high amount of orders we are receiving and delays in shipments from COVID-19 we cannot guarantee listed lead times, thank you for your understanding***
All of our Builder's Sets, Uppers and Rifle kits are custom made to order. Please allow 5-8 weeks, possibly sooner for completion, since these are custom for each order. Builder's Sets, Uppers and Rifle kits will be built in the order, the orders are received, but we strive to get all of our customers orders complete in a timely manner.
This can be ordered as a Reciprocating Dual Charge Right Side Charge
Right Eject upper, for small additional fee. Please email if you are
interested in this change.
*Recommendations*
We suggest at a minimum a 3oz. buffer and a tuned, flat wire or
triple wired spring to ease up the recoil. The mid-length gas tubes on these automatically
help reduce some recoil. Don't run a cheap mil spec buffer and spring,
it will give you problems! We highly recommend the Geissle Super 42 Buffer and Spring, you can purchase here.
The reason we recommend a heavier buffer, is to help slow the cycling
down when the gun is ejecting the brass to keep it from doing a full
rotation and ending up back in the ejection port sideways pinched
between the big and the upper. Also a heavier buffer will help to shove
that big round into battery.
If you are interested in purchasing this with our Free Layaway with no interest and no credit please email us to get started.
*.50 Beowulf®, Beowulf®, .50 Beo® and Beo® are registered trademarks of Alexander Industries Inc., and are in no way affiliated with Warr Dogz®